2010
03.19
After a bunch of R&D and building each MAF adapter by hand we have developed our final product.
The ETS MAF adapter has been engineered to work with no tuning and requires no MAF rescaling like other intakes on the market. The MAF adapter allows for a 5.0″ filter which provides the most surface area possible in the given space.
This is the same unit that is used on our 700+ whp Evolution X.
The MAF adapter is a direct bolt on to the factory air meter with a perfect transition to the inlet diameter of the MAF sensor tube.
With a built in dowel pin locater and precise inner diameter to make a 100% seal with the rubber grommet, this piece installs and fits as if it had a Mitsubishi part number.
The back of the ETS MAF adapter has been pocked milled for weight savings.
Finished product ready for shipment! 
No Tuning and a Hallman RX Boost Controller Set to 22psi we gained 52whp over stock. 
Link to the intake on the ETS Website: ETS Evolution X Intake
2009
11.02
Note from Precision:
It is with great pleasure that we are proud to announce the release of our newest product, the PW46 wastegate. These units feature a 46mm valve, and can be used in a wide variety of applications. They can be used in any kit or setup that currently utilizes a v-band style 44mm gate, but will work best with the supplied inlet flange (the inside diameter of our flange is slightly larger than our competitors). The wastegates will be shipped with all the necessary hardware (flanges, clamps, springs, etc), and can accommodate a wide range of boost pressures (anywhere from 1.5PSI up to 25.5PSI). All units feature a black, anodized wastegate cap, and a Kevlar reinforced silicone diaphragm. In addition, the unit features a five angle valve job, as well as high temp 17-7 ph springs (more durable and can withstand higher temperatures before changing rate). Lastly, the PW46 is set up for a 1 3/4″ pipe on the discharge side, and a 1 7/8″ pipe on the inlet. Pricing will be as follows:
$314.99 shipped
For further information on this, or any of our other products, please feel free to call me or PM.
Thanks!
michael
2009
10.28
We have 11 manifolds up for sale for $500.00 each. This manifold is perfect for the DIY individual. The flange is a T3 single scroll and works with any of the Garrett 30R’s, 35R’s and 37R turbochargers. The default wastegate flange is 38mm, but we do have a couple with 44mm wastegate flanges.
This exact manifold design has been pushed over 700whp and is currently run by DSM25PSI on the forum who holds the record for most HP on the stock ecu.
This is a limited time offer, so first come first serve.
If you have any questions, let me know!
We accept Paypal, Credit Cards and of course cash.
Thanks,
Michael
PayPal: Sales@extremeturbosystems.com
Credit Card: 360-263-3748
2009
10.27
After running it on the dyno we took the car to the track on one of the few days we had a little rain. With the track still wet, cold and moisture in the air the car ran 10.8 @ 133mph. The car has a ton more left in it with good track conditions. We plan on running it a few more times before the year is up.
